Page 33 - Energize June 2022

NEWS

Solar mounting system with metal tile. The combination of roof hooks
and moulded tile is integrated directly
additional elements into the roof structure and enables a
safe, even more flexible and multi-variant
mounting of modules. With the help of
Product optimisations of the pitched roof mounting system a new, shorter screw, the moulded sheet
metal tile can now also be used for above-
allow even faster installation rafter insulation. It is screwed directly

into the battens. Thanks to the use of the
robust roof tile hook, there is no need for
BC Solar, a leading full-service provider of SOLAR energy solutions, is expanding the time-consuming processing of roof tiles,
proven TopFix 200 pitched roof mounting system with sophisticated components: from and possible tile breakage and other roof
Ithe new and height adjustable G3 Vario outer clamp to the TopFix 200 Fast Click for the damage is avoided.
convenient installation of micro-inverters and the optimised Mammut Form S+ moulded This facilitates the installer’s work on
sheet metal tile. All components are ideally tailored to the overall system and enable even the roof, saves time and money during
faster and easier installation with maximum flexibility. module mounting and increases the
Thanks to the new adjustable G3 Vario outer clamp, the modules are now even faster stability of the entire system. An important
and easier to install on the IBC TopFix 200 mounting system than before. Where different focus for the company is also the proven
clamps were previously required for different module frame heights, the new outer clamp modular system. This means that the new
allows modules with frame heights of 30 to 40 mm to be installed with just one clamp. additional elements are compatible with
The G3 Vario outer clamp has an integrated adjustment mechanism. This does not only all other components of the IBC TopFix 200
allow for easy handling, but also guarantees quick and intuitive mounting without damaging product family and are ideally matched to
the module frame. For the installer, this means maximum flexibility with minimal planning each other.
effort. Installation with just one click is
Another product designed for quick installation is the Mammut Form S+ moulded sheet made possible by the new IBC TopFix 200
Fast Click designed specifically for the
installation of micro-inverters, for example
from the company Enphase. Again, speed
and flexibility are key, as the TopFix 200
Fast Click, which is already pre-assembled
on the micro-inverter, is simply clicked into
the TopFix 200 profile rail. This guarantees
safe and tool-free mounting of micro-
inverters in record time. The new Fast Click
is compatible with all available TopFix200
carrier profiles.

Contact Annika Bloem, IBC Solar,
www.ibc-solar.co.za/corporate/contact/
general-request

Contact us for all your advertising requirements!

Mark Yelland | Cell: 074 854-1597 | Email: marky@nowmedia.co.za

Katia dos Santos | Cell: 076 410 6909 | Email: katias@nowmedia.co.za