Page 13 - EngineerIt April 2021

MEASUREMENT AND INSTRUMENTATION

Three active modes using the UAT-600-T Transmitter Special applications
• Induction – the Transmitter will automatically start to radiate a signal around it using • 2 frequency options: 8 kHz and 33 kHz.
an internal antenna, used for tracing individual cables where there is no access to the • Locate non-metallic pipes and
line to connect test leads or a clamp. sewer lines.
• Direct connection with test leads – the most reliable method to trace individual cable • Take depth and current
or a pipe. measurements.
• Clamp (Included in the UAT-620 kit, optional for the UAT-610 kit) – provides an • Measure voltage, resistance and
efficient and safe method of applying a locate signal to a cable, where it is not output current.
possible/safe to gain access to a cable for making an electrical contact. • Advanced locating with two people.
• Locate ground faults with the optional
AF-600 A-Frame accessory.

Unparalleled safety
What truly sets the UAT-600 Series apart
from other underground locators is its
CAT IV 600 V safety rating. This allows
users to safely connect the transmitter
directly to an energised line up to 600 V
in a CAT IV environment. Previously, if a
crew needed to trace a specific electrical
line by transmitting a signal through it, the
line had to be de-energized first, adding
time and reducing productivity. n

*Tracing of non-metallic pipes and
conduits is possible after inserting metal
fish tape or cable

Find Utilities

Before You Dig

Tel: 010 595 1824
sales@comtest.co.za
www.comtest.co.za

Contact us for technical
or seminar information,
demonstrations or to locate
your nearest AUTHORISED
Channel Partner.
COMTEST ONLINE
UAT-600-EUR

Underground Utilities

Locator Series

2021/04/22 14:36
CDADGRA-20210403REV1_0_EngineeringIT-A5-Free-Amprobe-AT600.indd 1 2021/04/22 14:36
CDADGRA-20210403REV1_0_EngineeringIT-A5-Free-Amprobe-AT600.indd 1